SooperLooper Forum

Hi Jesse...... I really love SL and all the great features that it already do provide, thanks for sharing your knowledge and hard work!!
One thing I do think could be usefull, would be full midi feedback of current parameter status, .......this way SL could work like a dedicated hardware device, without a monitor! It would be great to have a midi binding setup for outgoing midi messages like the one for incomming , this way it could match difrent midi controllers.......A fullblown midi floorboard can be realized from Thorsten Klose´s fantastic free DIY midi projects ##www.ucapps.de##.....I have done quite a few of them and they do work exelent!!it could allso prowide full visual parameter feedback via leds!
here is the current DIY controller I use for SL.......

Sincerely Rasmus

Wow, awesome controller rasmus! Which on the list of DIY kits is that? Could the buttons be swapped for some momentary switches?

Hi Coop! Thanks

The controller is based on a midibox 64, wich can support up to 64 buttons + 64 pots + 64 leds,
All the buttons on my one is momentary exept the one in the upper right corner wich I have made for switching between bank A/B ......... meaning that this box actually has 32 button inputs and the A/B button do dicide wich a the 2 x 15 buttons are activated, this is not the most optimal way to construct it but otherwise the bank swithing has to be "programmed" in to the pic controller and I did not have thepatience to do that The box I have made has 2 inputs for expression pedals, normal ones like the roland with about 10k pots will work great......max-min values can be programmed here as well
All the buttons can be programmed to send all kind of midi messages and to send on, on/off, or toggle messages!
If you need further advise, you are welcome to contact me rasmusfris@email.dk

Sincerely Rasmus