Sooperlooper 1.6.13 doesn't loop

Problems getting SL up and running on Linux? Post here.

Moderator: jesse

Post Reply
newyew
Posts: 2
Joined: Fri Aug 21, 2009 5:19 pm

Sooperlooper 1.6.13 doesn't loop

Post by newyew »

Hello,

I have built Sooperlooper from Archaudio-SVN (x86_64), but it doesn't work. After starting it with "slgui" it can't connect the gui to sooperlooper-core (Port:UDP 9951).

Code: Select all

[lars@machine ~]$ slgui
slgui: our URL is osc.udp://machine:13258/
execing: 'sooperlooper -q -U osc.udp://machine:13258/ -p 9951 -l 1 -c 2 -t 40 -m "/home/lars/.sooperlooper/default_midi.slb"'

OSC error -2: Name or service not known
sooperlooper warning: could not open for reading: /home/lars/.sooperlooper/default_midi.slb
slgui: remote looper is at osc.udp://machine:9951/ version=1.6.13 loopcount=1 id=1250520691
but treating the engine URL as osc.udp://192.168.0.2:9951/
I get the message:

Code: Select all

Lost connection to SooperLooper engine.
See the Preferences->Connections tab to start a new one
Sooperlooper-core is running and nmap shows (9951/udp open).
Also in QJackCTL I see input and output from sooperlooper.
Has someone an idea?

Thanx
newyew
newyew
Posts: 2
Joined: Fri Aug 21, 2009 5:19 pm

Re: Sooperlooper 1.6.13 doesn't loop

Post by newyew »

Hi,
the Proplem has been solved. No entry in /etc/hosts was the Problem.
Post Reply