hi jesse, thank you for the answer
jesse wrote:Can you 'ping -c 4 luca-laptop' successfully? If so, you don't need to put anything in your /etc/hosts file.
i'm not sure to understand what that means... however i paste it i the terminal and that's the reply:
luca@luca-laptop:~$ ping -c 4 luca-laptop
PING luca-laptop (192.168.1.2) 56(84) bytes of data.
64 bytes from luca-laptop (192.168.1.2): icmp_req=1 ttl=64 time=0.044 ms
64 bytes from luca-laptop (192.168.1.2): icmp_req=2 ttl=64 time=0.042 ms
64 bytes from luca-laptop (192.168.1.2): icmp_req=3 ttl=64 time=0.042 ms
64 bytes from luca-laptop (192.168.1.2): icmp_req=4 ttl=64 time=0.045 ms
--- luca-laptop ping statistics ---
4 packets transmitted, 4 received, 0% packet loss, time 2997ms
rtt min/avg/max/mdev = 0.042/0.043/0.045/0.004 ms
is it ok?
jesse wrote: Next time, be sure to start JACK using qjackctl or however you usually do it first. Then the output from the terminals will be much less.
i did it and that's the result for "sooperlooper":
luca@luca-laptop:~$ sooperlooper
SooperLooper 1.6.14
Copyright 2007 Jesse Chappell
Jack: JackClient::SetupDriverSync driver sem in flush mode
Jack: JackPosixSemaphore::Connect jack_sem.1000_default_sooperlooper
Jack: Already connected name = sooperlooper
Jack: Clock source : system clock via clock_gettime
Jack: JackLibClient::Open name = sooperlooper refnum = 3
Jack: jack_set_graph_order_callback ext_client 91bb9c0 client 91bb9c0
Jack: SetGraphOrderCallback
Jack: JackClient::PortRegister ref = 3 name = sooperlooper:common_in_1 type = 32 bit float mono audio port_index = 7
Jack: JackClient::PortRegister ref = 3 name = sooperlooper:common_out_1 type = 32 bit float mono audio port_index = 8
Jack: JackClient::PortRegister ref = 3 name = sooperlooper:common_in_2 type = 32 bit float mono audio port_index = 9
Jack: JackClient::PortRegister ref = 3 name = sooperlooper:common_out_2 type = 32 bit float mono audio port_index = 10
OSC server URI (network) is: osc.udp://luca-laptop:9951/
Jack: JackGraphManager::GetTotalLatency port_index = 7 total latency = 0
Jack: JackGraphManager::GetTotalLatency port_index = 8 total latency = 0
Jack: JackClient::PortRegister ref = 3 name = sooperlooper:loop0_in_1 type = 32 bit float mono audio port_index = 11
Jack: JackClient::PortRegister ref = 3 name = sooperlooper:loop0_out_1 type = 32 bit float mono audio port_index = 12
Jack: JackClient::PortRegister ref = 3 name = sooperlooper:loop0_in_2 type = 32 bit float mono audio port_index = 13
Jack: JackClient::PortRegister ref = 3 name = sooperlooper:loop0_out_2 type = 32 bit float mono audio port_index = 14
Jack: JackClient::Activate
Jack: JackClient::StartThread : period = 21333 computation = 0 constraint = 21333
Jack: Create non RT thread
Jack: ThreadHandler: start
Jack: JackClient::kActivateClient name = sooperlooper ref = 3
Jack: JackGraphManager::GetTotalLatency port_index = 11 total latency = 0
Jack: JackGraphManager::GetTotalLatency port_index = 7 total latency = 0
Jack: JackGraphManager::GetTotalLatency port_index = 12 total latency = 0
Jack: JackGraphManager::GetTotalLatency port_index = 8 total latency = 0
Jack: JackClient::kGraphOrderCallback
Jack: JackGraphManager::GetTotalLatency port_index = 11 total latency = 0
Jack: JackGraphManager::GetTotalLatency port_index = 7 total latency = 0
Jack: JackGraphManager::GetTotalLatency port_index = 12 total latency = 0
Jack: JackGraphManager::GetTotalLatency port_index = 8 total latency = 0
Jack: JackClient::kGraphOrderCallback
Jack: JackGraphManager::GetTotalLatency port_index = 11 total latency = 0
Jack: JackGraphManager::GetTotalLatency port_index = 7 total latency = 0
Jack: JackGraphManager::GetTotalLatency port_index = 12 total latency = 0
Jack: JackGraphManager::GetTotalLatency port_index = 8 total latency = 0
Jack: JackClient::kGraphOrderCallback
Jack: JackGraphManager::GetTotalLatency port_index = 11 total latency = 0
Jack: JackGraphManager::GetTotalLatency port_index = 7 total latency = 0
Jack: JackGraphManager::GetTotalLatency port_index = 12 total latency = 0
Jack: JackGraphManager::GetTotalLatency port_index = 8 total latency = 0
and this is for "slgui":
luca@luca-laptop:~$ slgui
slgui: our URL is osc.udp://luca-laptop:13854/
slgui: remote looper is at osc.udp://luca-laptop:9951/ version=1.6.14 loopcount=1 id=1302006656
after "slgui" sooper started regularly, how come?
thanks
luca