UMI3 press/release commands

Talk about your MIDI bindings and controller setup

Moderator: jesse

Post Reply
gertjan
Posts: 1
Joined: Fri May 21, 2010 8:44 pm

UMI3 press/release commands

Post by gertjan »

Hello,

I am trying to do something fairly simple with the UMI3 (logidy). Press button 1, start recording, release, stop recording. My background: I know very little about Midi, even less about Jack and a lot about Linux.

You can set the UMI3 up to produce a bunch of different Midi commands. By default, the event = Note On, CH=1, V1 = C4 (61) and V2 is 127. Not entirely sure what V2 is, but according to the documentation, when the button is release the same command is send but v2 = 0. (which I believe is the same as note off, right ?).

At am running SL v1.6.18. In the midi setup screen, when I press learn, I see only an event when the button is pressed and it is always comes up as Note (not note on or off).

Any tips ? Does sooperlooper interpret the V2 field ?

Much appreciated

Gertjan

kasbah
Posts: 117
Joined: Tue Sep 06, 2011 7:01 pm

Re: UMI3 press/release commands

Post by kasbah »

Hey Gertjan, have you tried changing the binding to NoteOn and then make another one exactly the same but for NoteOff?

Post Reply