Search found 510 matches

by jesse
Fri Dec 20, 2019 10:44 am
Forum: Alternative GUIs
Topic: Raspberry Pi with Neotrellis
Replies: 1
Views: 469

Re: Raspberry Pi with Neotrellis

Very cool!!
by jesse
Mon Aug 26, 2019 7:43 am
Forum: OSC Interface
Topic: Which buttons should I press to simply double a loop ??
Replies: 1
Views: 1812

Re: Which buttons should I press to simply double a loop ??

The Multiply feature won't instantly double/triple/etc the length of a loop, since this is more of a real-time looper, you hit multiply and then have to let it continue in the "multiply" until it goes into the next loop iterations, and you finish the multiply when it is long enough for you. So if yo...
by jesse
Mon Aug 26, 2019 7:40 am
Forum: MIDI Setup
Topic: MIDI clock resolution ??
Replies: 1
Views: 1640

Re: MIDI clock resolution ??

MIDI Clock doesn't work that way... it is always a fixed 24 ticks per quarter note (beat). As for why you are having issues with the MIDI clock sync features in SL, there could be many reasons, and I would need to investigate to see what might be going on. If you were using the AU version as a plugi...
by jesse
Mon Aug 26, 2019 7:34 am
Forum: Miscellaneous
Topic: Any comparison or controls mapping to Mobius Looper ?
Replies: 1
Views: 614

Re: Any comparison or controls mapping to Mobius Looper ?

I haven't looked at Mobius in a while, but you can use a keyboard to control SL as well, although I would recommend MIDI, especially if you are thinking about building your own arduino device anyway. The specifics will likely be different than Mobius, but you can probably accomplish most of what you...
by jesse
Wed Jul 17, 2019 2:23 pm
Forum: Looping Techniques
Topic: Where is the stop button?
Replies: 13
Views: 30066

Re: Where is the stop button?

You can bind any of the loop commands to "all loops" by specifying it in the binding. You can't do it with the learn function, you have to go into the midi bindings page and set it up (or modify it) there. The mute_trigger command should do what you want with a binding to Loop # = All. If you have i...
by jesse
Mon May 06, 2019 5:25 pm
Forum: Alternative GUIs
Topic: EDP Clone - A Raspberry Pi Project
Replies: 31
Views: 16667

Re: EDP Clone - A Raspberry Pi Project

alignwaivers, just for reference, the GUI app itself registers 100ms auto-updates, so see what happens if you try that instead of 15ms.
by jesse
Sat Dec 15, 2018 12:08 pm
Forum: Alternative GUIs
Topic: EDP Clone - A Raspberry Pi Project
Replies: 31
Views: 16667

Re: EDP Clone - A Raspberry Pi Project

That's great! Better visualization than in the SL GUI :)

Feel free to post any links to videos (that you may have uploaded to youtube, etc) of how this whole project is working out....
by jesse
Thu Dec 13, 2018 12:46 pm
Forum: Alternative GUIs
Topic: EDP Clone - A Raspberry Pi Project
Replies: 31
Views: 16667

Re: EDP Clone - A Raspberry Pi Project

Did you get any OSC response sent to your OSC server port in either case?

The got xrun messages occur when the jack audio thread reports buffer overruns... what is your JACK configuration (including buffer size, number of buffers, sample rate, etc)?
by jesse
Mon Oct 29, 2018 8:02 pm
Forum: MIDI Setup
Topic: EDP Clone - A Raspberry Pi Project
Replies: 8
Views: 8212

Re: EDP Clone - A Raspberry Pi Project

Very cool! I haven't played with RPIs yet, but in terms of memory, even the RPI Zero has 512MB of ram, which should be plenty of space depending on your looping needs. SL uses single precision float samples (4 bytes) internally, so at 44.1kHz sample rate a single channel loop will allocate about 10M...
by jesse
Mon Oct 29, 2018 10:42 am
Forum: Mac Specific Troubleshooting
Topic: Loading a Session in MacOS Mojave
Replies: 2
Views: 3097

Re: Loading a Session in MacOS Mojave

This sounds like a network setup issue.... that popup only shows up when the GUI thinks the SL it is connected to is on another machine. Can you post a screenshot to the SL Preferences page showing the Connection page? Also can you post the contents of your /etc/hosts file (easiest way, is to open a...
by jesse
Wed Sep 05, 2018 5:05 pm
Forum: MIDI Setup
Topic: Window focus
Replies: 4
Views: 4096

Re: Window focus

If your foot controller shows up as a USB keyboard to the system, it will of course only work on the focused application... there is no way around that, as far as I know.
by jesse
Fri Aug 03, 2018 9:04 pm
Forum: MIDI Setup
Topic: Mute_all KEY Binding
Replies: 3
Views: 5281

Re: Mute_all KEY Binding

Sure you can bind select_loop_all to whatever you want...
by jesse
Tue Jun 05, 2018 3:31 pm
Forum: Looping Techniques
Topic: Advice Needed: Single-Button Looping? (à la Loopor)
Replies: 2
Views: 4236

Re: Advice Needed: Single-Button Looping? (à la Loopor)

Yes, you can get a single button setup going with SooperLooper, if you make MIDI bindings to the : record_or_overdub command (or one of the many variations if your needs are more complex). Double-tap will not work to reset though, it would need to be a long-press (if your pedals can be set up as mom...
by jesse
Thu May 10, 2018 2:42 pm
Forum: Mac Specific Troubleshooting
Topic: Clicks with some loops, no matter the xfade amount
Replies: 4
Views: 4437

Re: Clicks with some loops, no matter the xfade amount

So, in this example you have two loop instances, each one recorded a single loop using record to start/finish each? And on the synth you had the chord held before you hit record, right? It would be interesting to try it with holding the chord through the finishing record (but no sound at the start),...
by jesse
Sun May 06, 2018 8:28 pm
Forum: Mac Specific Troubleshooting
Topic: Clicks with some loops, no matter the xfade amount
Replies: 4
Views: 4437

Re: Clicks with some loops, no matter the xfade amount

Can you describe how you are creating the loops (steps of recording and other commands)?
by jesse
Tue May 01, 2018 9:36 am
Forum: Mac Specific Troubleshooting
Topic: Channel Level Issue
Replies: 2
Views: 4212

Re: Channel Level Issue

The only thing I can think of is that you may be connecting an extra per-loop output from one channel to the system:playback_1? You generally only want to connect the sooperlooper:common_out_1 to system:playback_1 and sooperlooper:common_out_2 to system:playback_2. Double check and make sure somethi...
by jesse
Tue May 01, 2018 9:32 am
Forum: MIDI Setup
Topic: Mute_all KEY Binding
Replies: 3
Views: 5281

Re: Mute_all KEY Binding

Keybindings do apply to the selected track, but you can select all tracks by pressing 0 (assuming you still have that assigned to select_loop_all), and then your bindings will affect all tracks together.
by jesse
Tue May 01, 2018 9:28 am
Forum: Bug Reports
Topic: Remote gui not working on a remote machine
Replies: 2
Views: 7627

Re: Remote gui not working on a remote machine

What OS are these machines running? It does look like the sooperlooper on alarmpedal is trying to respond to the slgui request from cloud-laptop by using its hostname reported in the request instead of an IP address, which is where that OSC error is coming from. I'll need to go in and see what is go...
by jesse
Tue Mar 27, 2018 12:02 pm
Forum: MainStage
Topic: Looper with more than 2 channels in a Mainstage track?
Replies: 4
Views: 10099

Re: Looper with more than 2 channels in a Mainstage track?

Yeah, that feature was primarily useful if you use SL with JACK... it doesn't have any use with the AU plugin version...
by jesse
Tue Mar 27, 2018 12:01 pm
Forum: Looping Techniques
Topic: exporting overdubs/layers
Replies: 2
Views: 5354

Re: exporting overdubs/layers

No, there is no way to export the overdubs. All the loop audio is stored in memory at runtime (including the undo/redo data). Sorry about that!
by jesse
Tue Jan 23, 2018 7:02 pm
Forum: Looping Techniques
Topic: Electronic Live Set Style
Replies: 6
Views: 7777

Re: Electronic Live Set Style

Well, it could also mute the main input too, there would just have to be some sort of convention in place for what it does if there are more than 1 loop instance (would it mute the in-mon if *any* of the loopers was playing, etc). Could the "button" you hit to stop recording the loop also tell Live ...
by jesse
Tue Jan 23, 2018 5:58 pm
Forum: Looping Techniques
Topic: Electronic Live Set Style
Replies: 6
Views: 7777

Re: Electronic Live Set Style

That is tricky, and means you may not want to rely on this technique right now. This really needs a new feature to be integrated to handle the sync/rounding cases. It would be a 'mute input monitoring after record' option, and it would only work if you were using the loop-specific side chain inputs....
by jesse
Tue Jan 23, 2018 5:02 pm
Forum: MIDI Setup
Topic: How exactly does "Multiply" start and stop?
Replies: 1
Views: 4571

Re: How exactly does "Multiply" start and stop?

Without quantize turned on, it will start the multiply immediately and will begin overdubbing audio from wherever it is at the time, as you continue through more cycles it extends the loop time underneath. So without quantize you want to start as close after the loop start as possible, but not befor...
by jesse
Tue Jan 23, 2018 4:53 pm
Forum: MIDI Setup
Topic: "Undo all" stops working / types of midi commands (CC, PC)
Replies: 1
Views: 3932

Re: "Undo all" stops working / types of midi commands (CC, P

From what I've read in the fcb uno manual you will probably want to use CC momentary toggling setup or have it send Note On (it sends note off on release).. that way you can still do long press things. In MainStage, you might try one of the Button control items (probably momentary). I'd really need ...
by jesse
Fri Jan 19, 2018 11:32 am
Forum: Looping Techniques
Topic: Electronic Live Set Style
Replies: 6
Views: 7777

Re: Electronic Live Set Style

Hmm, SL has no control of what you are doing outside of it if you are feeding the input from some kind of running loop. Unless you are only using the input monitoring within SL ("in mon"), in which case you could potentially make a MIDI binding that sets that control to 0 after you finish the record...